This SOMA event is not conference with presentations only ! Each presentation is linked to real life DEMO in the afternoon. You will see three different designs or applications to be processed.
WE WISH YOU A MERRY CHRISTMAS AND A HAPPY NEW YEAR! YOUR SOMA TEAM
Thank you for visit us at SOMA!
Visit us at K Show - Hall 4, stand D20 or attend Autumn Open House - 25th of October in Lanskroun, Czech Republic
Don't miss the opportunity to visit Soma Open House October 11 & 25! See LIVE top speed printing with bouncing gaps.
Don't miss the latest issue of INSPIRE magazine!
SOMA reported on a very successful drupa 2016 where the company’s new Optima 2 flexographic printing press was officially launched endorsing the already well established Optima technology that places it alongside the world's premier manufacturers of flexographic printing presses.
If you missed our demo, then surely you missed the most challenging show within the CI flexo manufacturer family!
Soma introduced Optima2 and ARun at drupa 2016.
The most succesfull exhibition for Soma ever. Anounced Allstein and Soma cooperation. Two LIVE demos a day. Zero meter waste set up ARun system.
and witness both OPTIMA and Optima2 being prepared and run as production jobs including fast change overs.
Challenge short runs by using A RUN system available in OPTIMA2 press, register & impression is set automatically without any set-up waste.
Implement the Press Monitoring System developed by SOMA and supervise press efficiency or energy consumption via Internet.
Reduce ink waste by using the unique Ink Cartridge System developed by SOMA. Save money by economic printing of spot colors or any expensive ink.
Challenge your competition by using the flexible design concept developed by SOMA. Step out of the crowd and implement up/down stream technologies into your press anytime you decide.
K.K. IRISU was officially appointed as an additional sales partner of the Czech based manufacturer of flexoprinting and converting equipment SOMA for the territory of Japan.
|Discover Advanced Bounce Control system developed by SOMA and print your most difficult design at desired speed.
|See it live at DRUPA 2016
Hall 15 / Booth A01
In preparation for the launch of our new, flexographic printing press at drupa 2016, we held our annual sales conference
Cope with growing demands on high quality print and economic pressure.
Together with its Chinese business and strategic partner APET INTERNATIONAL, Czech flexible packaging equipment manufacturer SOMA will present its latest technology at Chinaplas 2016.
SOMA has signed up a Service Agreement with Asesores en Conversión y Soluciones S.A.P.I. de C.V. (ACS) based in Toluca, Mexico a new cooperation for the service and sales of spare parts of its equipment in Mexico.
We wish you a Merry Christmas and a Happy New year!
More than 80 attendees from Turkey and Iran were present at the conference organized by Soma, Desen and other top flexible packaging suppliers.
Soma Enginnering, represented by Mr. Joerg Kullwitz, attended 2015 International Eco-friendly Printing Techniques Conference in Seoul
SOMA reports on a successful Labelexpo Europe where the company’s Optima flexographic printing press made its debut to the international label industry.
We have developed the Optima flexo press to meet growing opportunities for mid web printing.
Do not hesitate to attend the upcoming SOMA Premia Open House.
David Stevens, process specialist at Soma Engineering,explains how the company has been testing flexo print on retort packagaging.
Over 130 guests from the printing industry attended the first flexo technology seminar in Korea. The seminar organized by PrinWelt Co.,Ltd.
On 18th June 2015, UV Service company, a new partner of SOMA in Russia, organized a one-day seminar in Moscow for wide web converters.
Soma Engineering has signed up as an exhibitor at Labelexpo Europe 2015, where it will display its mid web Optima CI press.
Soma Engineering drew an audience of over 80 at its June 2015 Flexo Challenges Conference
Company SOMA together with its Chinese representative APET INTERNATIONAL CO.,LTD. participated at CHINAPLAS show.
Almost 90 attendees from Poland were present at the conference organized by Wist, Soma and other top flexible packaging suppliers.
Soma has announced details of its third annual Flexo Challenges Conference in June that will include presentations from key industry personnel.
We are pleased to announce that SOMA will participate at the FTA INFO*FLEX show.
Don't miss the latest issue of INSPIRE magazine!
Soma attended Specialized Converting exhibition, ICE Europe 2015, Muenchen, Germany.
The impressive Hotel Majestic Prague was the venue for the annual international meeting for 20 representatives from 4 continents.
Soma attended Specialized Flexible Processing, Packaging and Printing exhibition, Upakovka 2015, Moscow, Russia.
Soma Engineering attended Specialized Flexible Packaging Symposium in Paris on January 15th.
We will repeat our successful spring conference with OPTIMA demonstration including 4C colour Pantone Reproduction.
Soma held its traditional Open House where attendees travelled to Czech Republic to see printing and converting demonstrations.
November 2014. Soma enjoyed success at Plastimagen 2014, Mexico City.
Soma Engineering has won the prestigious FlexoTech Innovations Award with its new ink cartridge system for spot colour printing on CI flexographic printing presses.
Participation at Propak Cape 2014, South Africa was extremely successful in promoting our business activities.
We are pleased to announce our Hungarian customer company PANDAN KFT. held the opening ceremony for its new Soma machines, the flexographic printing press SomaFlex MIDI II and the slitter rewinder Pluto III.
More than 50 attendees from Poland were present at the Conference organized by Soma, Chespa and other top flexible packaging suppliers.
Do not miss the latest issue of INSPIRE magazine dedicated to Flexo challenges!
Not to be missed , valuable updates from Soma Engineering and the world of Flexography.
Soma Engineering has announced the development of a new ink cartridge system for spot colour printing on CI flexographic printing presses.
Soma's representative for Iran, Iraq and Afganistan, company Iran Rotative (IR), installed at its 'Printing Training and Exhibition Centre' slitter rewinder Pluto III.
Special interest in flexo printing alternative for retort pouches
Soma Engineering is pleased to announce the official opening of its Villa Globe conference facility
Effective from June 1, 2014, Dr Peter Lechner is the new Sales Director for Soma Engineering responsible for the development of all the company’s home and international markets.
Soma will participate at RosUpack show with introduction of a new Venus III - T slitter and with the succesfull flexographic printing press OPTIMA.
Soma has attended the PLFTA forum held in Warsaw in June 3 - 4 and presented flexografic printing press Soma Flex OPTIMA.
May 2014. Before a very succesfull Flexo Challenges Conference 2014 a VIP delegation from China visited company Soma Engineering.
More than 160 attendees from four continents witnessed a big success of second Flexo Challenges Conference
In a move to strengthen its presence in Asia Pacific, Czech Republic based SOMA Engineering has opened a subsidiary office in Singapore.
Soma Engineering is pleased to congratulate Reflex Flexible Packaging Ltd to EFIA 2014 awards.
Listen to our presentation at Solutions Theater and visit our booth.
What you'll HEAR at the conference, is what you SEE during demo.
Registratistration for the May conference including all detailed information has started!
Printing and converting equipment manufacturer Soma Engineering has been honoured in the 2014 iF Awards, Product Design Category.
Having issues with printing or lamination? Contact our Flexographic & Lamination experts as part of our Soma Globe.
February 2014. SOMA Engineering has announced the appointment of AP Graphics as the company’s agent for France and its French speaking territories.
Soma Engineering will attend Specialized Flexible Processing, Packaging and Printing exhibition in Moscov on January 28 to 31.
Soma Engineering will attend Specialized Flexible Packaging Symposium in Paris on January 14th.
If I were you, I would ask the tree, what he wants to say.
Running concurrently with the K-2013 in Germany, Soma held its traditional autumn Open House
SOMA LAUNCHES NEW OPTIMA SHORT RUNS FOR PROFIT PRESS
Innovation at Soma has created a completely new press design concept...
Soma Market Development Manager as a panel member attended 2nd Specialty Films and Flexible Packaging Global Conference 2013 in Mumbai
This unique event was held on the 21 st August in the Iran Rotative training centre (PTEC) in Iran
Don't miss newest issue of Soma Newsletter dedicated especially to Flexo Challenges Conference.
Soma Engineering has appointed David Stevens as Market Development Manager for its range of flexographic printing presses.
Visitors to the show witnessed the world premiere of Optima, the latest innovation of printing press from Soma Engineering
The 2013 Spring Open House held by SOMA in May was originally planned to run from May 29 to June 8
Historically, Soma Engineering has a tradition of adding value and innovation to the world of flexographic printing.
Soma Engineering will attend the international specialised exhibition RosUpack in Moscow held from June 18 to 21 in IEC "Crocus Expo", Moscow, Russia
The new exhibition in Munich organized 8th International Fair of ICE Europe.
SOMA Globe and stream-lined service program launched at Upakovka/Upak Italia 2013
Discover what we do in SOMA in Christmas time
Soma held its traditional autumn Open House on October 15-19 and on November 5 - 9 where participants at both events had the opportunity of seeing printing and packaging converting technology at is best and where three turned out to be the magic number.
October 15th - 19th and November 5th - 9th 2012
SOMA year 2012 is full of important milestones and shows in the flexible packaging industry and the upcoming event is definitely one of them.
The upcoming SOMA Autumn Open House is going to be focused on magical THREE in flexible packaging process line.
In September 2012, SOMA celebrated 20 years in business. This mile stone event coincided with the opening of its Soma Globe Technology and Training Centre in Lanskroun where over 4000 visitors gathered to celebrate the occasion.
We are pleased to announce the appointment of Milan based, Conca Consulting as our representative for the Italian market. Conca Consulting will have sole responsibility and exclusivity for sales and support of our range of printing and converting machines in the region.
Company Soma will celebrate its aniversary by opening a new technology and training centre Soma Globe.
Soma Globe confirms company global position on worldwide print and converting flexible packaging market.
We will be launching the Premia flexographic printing press, the Venus III and Pluto III slitter rewinders on stand A39, Hall 17. The line-up will be complemented by the latest version of our Lamiflex E laminator.
With the challenging economic climate in mind, SOMA will launch its revolutionary
EFFICIENCY & QUALITY (E&Q) workflow concept.
Soma will attend the international specialised exhibition RosUpack in Moscow.
Soma Engineering has appointed Insight Communications as its agent for the sales and support of its products in the Indian market.
Czech Republic based SOMA Engineering has announced the installation of a second flexographic printing press at UK-based Reflex Flexible Packaging.